Inspection Pits

Below is a selection of the most popular inspection pits we supply. Of course we can source different products, if these do not match your needs. So If you don't see what you want here, please contact us and we'll do our best to help.

(Click on the images to view them at their largest available size)

 Our Steel Fabricated Inspection Pits

back to top 

Our Steel Fabricated Inspection Pits

are Manufactured in the UK

  • They are fully Designed to your own individual requirements. We can manufacture any length, width and depth. All joints are fully seam welded and sealed. All steel profiles are made using a 800 tonne CNC press giving a very high quality to the millimetre finish.

All our pits are manufactured from high quality steel. The walls are 5mm thick with pressed profile recess for the lighting. The floors are 6mm thick checker plate with durbar reinforcing below. Jacking rails are 150 x 75mm as standard and doubled for our commercial inspection pits.
All side and floor panels are braced with 6mm thick steel at less than 1m centres to eliminate internal bracing during installation.
10yr guarantee against water ingress.
CE marked to comply with EN1090 EXC2.
All inspection pits are supplied with 18mm SBS boards and polythene cover for delivery.


 Pre Painted internally before Delivery

back to top 

Pre Painted internally before Delivery

White Walls and Black Floor

  • To ensure full penetration of the painting process and longevity of the Inspection Pit the whole pit is completely de-greased and fully abraded all our seam welds are fully sealed prior to painting.

Painting Process
The exterior of our inspection pits are finished in two coats of black container paint which is very hard wearing.
The internal work area of the inspection pit is applied with 3 layers of zinc phosphate white gloss enamel.
The internal floor is also painted in black polyurethane gloss paint.
All our Inspection pits are manufactured in accordance with BS EN 1090-2-2008 and A1-2011 and are CE Marked


 Customising your Inspection Pit

back to top 

Customising your Inspection Pit

Get it right at point of order

  • We want to ensure that everything you expect to be with your new inspection pit is supplied. We have many options we can offer, including low voltage lighting, power supplies, galvanised air-lines, toolboxes etc, etc.

We will discuss all your needs and produce a specification sheet with build plan for you prior to manufacture.
Once this specification has been agreed build will commence.


 Add on items - cuts down on builders time

back to top 

Add on items - cuts down on builders time

Additional add on items

  • You may be buying your inspection pit for use in a Testing Lane or the new ATF Truck Lane in conjunction with DVSA. Whatever your requirement we have many years of experience. We can manufacture from steel all the necessary extras that you will require. Wheelplay detector, turning plate and roller brake tester boxes can all be supplied. Just let us know when you call.

We can manufacture -
Wheelplay Detector recess boxes
Turning Tray recess boxes
Storage or cupboard space
Cable and Service Ducts
Roller Brake Tester steel boxes


 Let us arrange delivery for you

back to top 

Let us arrange delivery for you

Direct to your premises

  • We can arrange safe delivery direct to your site if required, alternatively if you want to collect yourself, we will load your truck at our premises.


 Installation at your premises

back to top 

Installation at your premises

Let us assist with your installation

  • A lot of our customers have their own building contractor and would like to carry out the bulk of the work themselves. However that contractor may not have experience of installing inspection pits. In this situation we can offer a member of our team to be available when the pit is delivered.

That member of our staff will be there to oversee offloading, lowering the pit into the ground, levelling and overseeing the first concrete pour. They will liaise with your site foreman and advise on any issues that may have been overseen.


 Let us Supply and install the Equipment

back to top 

Let us Supply and install the Equipment

  • Multitune have been in this business since 1984 and have many years of experience relating to garage equipment manufacturers and their equipments. Knowing what equipment is being used with our inspection pit is a bonus, we can supply a package including all your equipment if required.

Car, Van, Bus, Coach and Truck Roller Brake Testers.
Car, Van and Commercial Wheelplay detectors.
Hydraulic and Air Hydraulic Jacking Beams 2t to 40 tonnes.
Headlamp Aligners with surface or recessed rails.
Floor Painting and markings.


Prices change according to stock availability and exchange rates...
Please contact us and we'll find you the best deal currrently available!

If you don't see what you need, please don't hesitate to contact us - we can source a wide range of products, of which only a selection is shown here.

Ravaglioli LogoBradbury LogoCrypton LogoDieseltune LogoRS Workshop Equipment LogoMajorLift Hydraulics LogoProsol LogoPremier Diagnostics LogoVeylen Logo